|
Dynasty Subwoofer
The Dynasty is a sonic powerhouse. It doesn't apologize for its size because that is what helps it achieve subsonic nirvana. When your appetite for the absolute lowest bass performance seems impossible to satisfy, it is time to consider the Dynasty.
You've heard about those amazing movie soundtracks that drop to subterranean depths, but when you watch them your subwoofer doesn't seem to make that magic happen. Few subwoofers can, and they are usually priced out of this world. The Dynasty changes all this and allows you to experience this fourth dimension of sound.
The Dynasty flaunts the advantages of being an Extended Bass Shelf (EBS) design. In short, the computer-aided cabinet design takes our world-renowned 18" driver and extends its reach into the realm of bass that can only be felt.
The top end of the spectrum is equally impressive. With a flat frequency response, the mid-bass is simply astounding. Its visceral impact and definition are just as impressive as the low end. The end result is a subwoofer with outstanding musicality and a seemingly unlimited low end.
The Dynasty's cabinet has been engineered to handle the enormous requirements placed upon it, to reproduce bass nearly an octave below audibility. The huge slot-loaded port effortlessly sweeps massive amounts of air without compression. To keep the cabinet free from vibration, it is heavily lined with internal bracing that renders the outer walls inert and controlled.
What the Dynasty does best is bring a music or home theater system to life. It adds an unexplainable amount of dynamic capability to even the best setups. No matter what size your listening room is, the Dynasty is up to the task and then some.
Features |
- Slot-ported high output EBS design
- 18" high output subwoofer driver
- Exclusive 600w RMS amplifier
- Custom sculpted grill with traditional black fabric
- Compact CAD designed cabinet
- Precision CNC machined in-house
- Environmentally friendly finish
- Frequency response: 14 - 150 Hz +/-3 dB anechoic
- True 12 Hz or lower in-room extension
- 1500w short-term RMS
- Weight: 150lbs. shipped
- Size: 27 H x 20 W x 30 D (31 w/ grill)
- Designed and manufactured in our own USA factory
|
|
Driver |
 With its awe-inspiring size and incredibly powerful motor design, this 18" driver takes our subwoofers to the next level. The driver generates huge output without much effort, and keeps its distortion incredibly low. Along with thunderous output, it has incredibly tight bass and musicality.
It all starts with an extremely high BL (motor strength) high excursion motor design featuring a 3" voice coil and hyper-linear spider. Utilizing expensive high-strength ceramic magnets, the driver delivers both high sensitivity and low distortion.
To properly harness the power of motor, we used a massive cast aluminum frame. The downright beautiful silver-anodized frame aids in cooling the motor both with its surface area and its larger air flow vents located near the voice coil.
To move the kind of air that we at Epik demand, we utilized a beefy curvi-linear Kevlar impregnated paper-pulp cone. What makes it so special is our use of an extra tall and thin rubber surround. The surround allows for huge excursion, and also results in an enormous surface area.
The massive cone area gives this driver several huge advantages. It effectively uses less excursion for the same output level as a smaller driver. Lower excursion translates into lower distortion. It works less to create the same output than most drivers. In fact, the cone area of this 18" driver is roughly equal to a pair of 13" drivers. When directly compared to a single 13" driver, it only needs to move about half as much for the same output!
- Massive cast aluminum silver anodized frame
- Dual 3 inch high power voice coils
- CAD optimized motor structure
- Precision CNC-machined low carbon steel components
- High end ceramic magnets
- Ultra-stiff Kevlar impregnated paper-pulp cone
- Half-roll linear rubber surround
- Gold plated power terminals
- HBX motor design
- High excursion capability
- Extremely flat frequency response
- Incredibly high motor strength
- Low distortion motor design
- Enormous cone area
- Very high efficiency
- Ultra-clean and powerful mid-bass
- Designed in the USA
- Exclusive Epik driver design
|
Amplifier |
With a list of world-class features and performance to match, our amplifier is a perfect match for our low frequency drivers. It has an extremely advanced switching power supply design and audiophile preamp-section, which provide efficient, controlled power with amazing sound quality to match.
- 600w RMS
- 1500w short-term RMS
- Balanced XLR inputs
- Unbalanced RCA inputs
- Advanced switching power supply
- Ultra-efficient design
- Extremely rigid solid steel face plate
- Massive dual internal aluminum extruded heatsinks
- Dedicated LFE or crossover input
- Variable crossover - 50-150 Hz
- Adjustable 0-180 phase control
- Off, On or Auto-on power settings
- No-hum, ground-loop free design
- Incredible sound quality
- 120/220 voltage friendly
- Designed in USA
- Exclusive Epik amplifier design
|
Cabinetry |
|
 Hand-built in our own factory, our legendary cabinets give our components a rock solid foundation. All of our cabinets are designed in CAD for flawless assembly and performance. The cabinet components are then precision cut on our high speed CNC router. This results in both a reliable design as well as world-class build quality. Our cabinets are guaranteed to bring out the best in our drivers and amplifiers.
- Built-in high-flow slot loaded custom port
- 100% manufactured in-house
- Precision CNC cut parts
- Expensive ultra-refined MDF used throughout
- 1.5 inch dual-thickness baffle
- Heavy internal bracing with open airflow
- Ultra-rigid overbuilt design
- Flush-mounted components
- CAD designed
- Furniture grade assembly
- No nails
- High quality adhesive
- Custom sculpted grill with traditional black fabric
- No-vibration grill pins
- Proprietary Micro-Bead painted finish
- Acoustically damped for sound quality
- No harmful fiberglass used internally
- Designed and manufactured in the USA
- Exclusive Epik design
|
Measurements |
|
|
|